Mark's Mustang II Project Pages
Guest Book

Cixi Jinmao Car Parts Co.,Ltd is specialized in manufacturing the warning triangle of automobile,and auto safety kit ,safety vest and other safety products. Using the reflective mold core that exported from Japan.The triangular warning sign produced according to ECE27R European requirements, approved by Germany TUV quality authentication and got E-mark certificates.Our products got a good reputation in Europe ,South America,Middle East, Africa, etc. Meanwhile, the products strictly comply with automobile criterion GB1951-2003 of P.R.C.,testing through the national automobile quality supervision and inspection.We are cooperating with SVW, BYD, CHERY, GEELY and faw-Heavy/Medium Duty Trucks recently.

All staff of the company are adhering to the"sincere solidify,brave in exploitation,the innovation" spirit ."People-oriented, take the market as the guide, technology as backing,speed efficiency"as the management philosophy.Continuous exploration in the management to strengthen the internal scientific .

Our CertificatesCE certification 26cm Magnet Traffic Baton
website:http://www.china-warningtriangles.com/

CE certification 26cm Magnet Traffic Baton
Location, - Wednesday, December 06, 2017 at 07:30:31 (EST)

high frequency precision welded square pipe mill equipment/machine


square pipe mill equipment of scope of supply and service


NODescriptionQuantityRemarks
1Uncoiler1 setManual/Pneumatic/Hydraulic expanding
2Shearing and butt welding1 setManual/Pneumatic/Hydraulic cutting
3Accumulator1 setVertical/Horizontal
4Forming & Sizing unit1 setDC motor/AC motor
5Flying cutting saw1 setHot friction cutting/Cold cutting
6Run-out table1 set
7Solid High frequency welder1 set


square pipe mill equipment of technique data (TY89):
1.Coil thickness: 1.2-4.0mm
2.Producing pipe size: Ф35mm-Ф102mm
3.Line speed: 0-70m/min
4.Operation area: L56m X W5m


square pipe mill equipment Parts of Line
5.Double heads Decoiler--------------------------------1 set
6.Shear & butt welding device-------------------------Optional
7.Horizontal accumulator--------------------------------1 set
8.Forming & Sizing unit----------------------------------1 set
9.Hot frication saw----------------------------------------1 set
10.Run out table (single side discharging)-----------1 set
11.Control system------------------------------------------1 set
12.Roller------------------------------------------------------Optional / prepared by Buyer
13.Pneumatic system--------------------------------------Prepared by Buyer


square pipe mill equipment of Welding pinch frame
Type: 3 rollers pinch
Shaft diameter: Φ50mm
Material of shaft: 40Cr (HF quenching)
Adjusting: Manual screw adjusting





square pipe mill equipment of Suzhou Tianyuan






FAQ:
Q:What is the specification of large caliber stainless steel welded pipe?
A:Specification for large caliber stainless steel welded pipe:
Diameter 3mm-76.2mm
Thickness 0.25mm-3.0mm

Square Pipe Mill manufacturers
website:http://www.china-tubemill.com/pipe-mill/square-pipe/

Square Pipe Mill manufacturers
Location, - Wednesday, December 06, 2017 at 07:30:23 (EST)

Our Factory
TRI-TRUST Machinery has always been a leader and pioneer in Chinese industry for high fidelity plastic bag machine. As a dedicated manufacturer, we can provide custom integration solutions that include everything from material to plastic bag. We specialize in the development, assembly, distribution, and servicing of products such as the recycling machine ,blowing film machine, printing machine, slitting machine and bag making machine. Product samples can be provided free of charge. All orders are processed with “real-time” follow up, a service that includes hi-res photographs of the current production stage.
Product quality is highly prioritized in our manufacturing process. Regular maintenance of processing machinery guarantees optimal performance and minimal error. We independently manufacture key machine components to ensure assembly integrity. Our dedicated staff attends regularly scheduled training sessions to further enhance their skills. Their proficiency is tested on a frequent basis. Technical exchange forums enable us to keep pace with current technologies. All of our equipment sets are rigorously tested and bench marked prior to shipment–only the highest quality products will reach our valued clients.
In a word, quality attracts customers, credit standing makes beneficial result.

Our Product
recycling machine ,blowing film machine, printing machine, slitting machine and bag making machine
Product Application
plastic packaging
Production Market
Until now, our machine had sold to more than 30 countries and regions such as south America: Peru ,Ecuador, Guatemala, Colombia, Honduras, Argentina,Bolivia,Venezuela
Middle -East: The UAE,Oman,Lebanon,Saudi Arabia,Yemen,Jordan
South-East Asia: Philippines, Malaysia, Thailand, Indonesia, Vietnam,Pakistan Bangladesh,Sri Lanka,India
Africa: Algeria,Egypt,Ethiopia,Angola,burkina faso,Togo,Ghana,Kenya, Libya
Mauritania,Morocco,South Africa,Nigeria,Tunisia, Zambia
Our service
1. Purchase Service
RUIAN TRI-TRUST MACHINERY CO.,LTD have a specialize and efficiency working team.If you are new on the printing and packing area ,Some samples of your products could be shew to us will be appreicate ,we will give you specialized suggestion of whole work .
2. Shipping Service
RUIAN TRI-TRUST MACHINERY CO.,LTD have a spcialized and independent department which just for shipping the buyer's goods .The workers are knowing T/T,L/C Items well.all Exported documents could be made perfectly .
WENZHOU JINGHUA COMPANY cooperate with the most famous shipping company in China also.They could provide the belt and economic shipping ways to the buyer's port.
3.Installation Services
Installation Services are available with all TRI-TRUST Company machines. TRI-TRUST Company will dispatch technician to The Buyer's factory to installation and preparetion of machines .But the buyer need to surpply the round trip tickets ,food ,hotel cost.
4.Clients Training Services
TRI-TRUST Company advise The buyer could send own technical come to TRI-TRUST factory to learn how to operate machines. TRI-TRUST Company technician will teach and train the learners hand by hand till he can operate machine by himself.
Obviouslly, Traning within Installation period is acceptable.
5.After Sales Service
TRI-TRUST Company machines guarantee time is one year.
Many easy broken spare parts will be prepared in the tool box together with machines.
Any parts broken ,Just a pictures or a videos.Recycling Material Blowing Film Machine
website:http://www.chinatritrust.com/

Recycling Material Blowing Film Machine
Location, - Wednesday, December 06, 2017 at 07:30:15 (EST)



Xi’an Huaheng Instrument Co., Ltd., located in Xi'an National Hi-Tech Enter Prises Accelerator , is a manufacturer and supplier committed to the research and production of intelligent pressure transmitter, level transmitter, flow meter and HART Communicator.






The company owns a technical team that engaged in automation systems design, installation for several years. Nowadays, the company relies on its research strengths to provide with advanced technology, reliable automation products and dedicated after-sale service.



We mainly engaged in five categories products. Pressure parts : pressure transmitter, pressure gauge. Temperature parts: temperature transmitter, temperature gauge. Flow parts: Mass Flowmeter Vortex Flowmeter and Electromagnetic Flowmeter.These products are widely used in electricity, water, food & beverage, petroleum, petrochemical, coal, chemical, metallurgy industries.




The company adheres to the principle "people-oriented, technology advanced, quality first, integrity and pragmatic" to supply customers with the reliable products.differential liquid level transmitter type
website:http://www.china-transmitters.com/
website2:http://www.h-transmitter.com/

differential liquid level transmitter type
Location, - Wednesday, December 06, 2017 at 07:30:04 (EST)

Product Description
Advanced cnc machine parts key specifications:
1) Material: Brass aluminum,steel, stainless steel etc.
2) Surface treatment: nickel plating (or zinc plating and chrome plating)
3) Able to produce parts with external diameters between 2 and 100mm with tolerance of +/-0.02mm.
4) Main processes: cutting, hot forging, sand blasting, drilling, threading, Turning, Polishing
5) Equipment: forging machine , CNC milling machine, meter lathes, automatic lathing machines, sand blasing machine, polishing machine
6) We also can be supplied forging part according to customers' drawings or samples.
7) QC control :100% inspection on critical dimensions with Supply chain process PPAP

Title: CNC Machining Parts
Feature: CNC machined, milled, turned,grinded,drilled parts
Details as following,








Please see our production machines and machining process as following,








Packaging & Shipping






Company Information








We have lotsof production equipment and inspection tools & facilities , please see the following details








FAQ
Q: Is it possible to know how are my products going on without visiting your company?
A: We will offer a detailed production schedule and send weekly reports with digital pictures and videos which show the machining progress.

Q: How can you ensure the quality?
A: We have QC department to control the quality from the begining of production until goods finish.

Q: If you make poor quality goods,will you refund our fund?
A: As a matter of fact, we wont take a chance to do poor quality products. Meanwhile, we manufacture goods quality products until your satisfaction.


XINCHUANGHUI, one of the leading China manufacturers and suppliers with over 15 years' experience, now brings you high quality precision cnc machining metal aluminum steel brass plastic parts at competitive price. With many products in stock in our factory, we warmly welcome you to buy or wholesale discount products at low price with us, and customized orders are also welcomed.Aluminum Mechanical Keyboard factory
website:http://www.chinatopmachining.com/

Aluminum Mechanical Keyboard factory
Location, - Wednesday, December 06, 2017 at 07:29:51 (EST)


molding is a high efficient process by which metal stamping, bushings, electro-mechanical parts, filtration materials and other discrete parts are combined into a single component through the injection of thermoplastic around the carefully placed parts.
Why molding:
Reduce assembly and labor costs
Reduce size and weight
Increase reliability
Increase design flexibilityChina Injection Mold suppliers
website:http://www.china-tool-die.com/plastic-injection/

China Injection Mold suppliers
Location, - Wednesday, December 06, 2017 at 07:29:42 (EST)

Ningbo taizhun metal products Co., Ltd. is a professional design,development, manufacturing,sales and service as one of the automatic sheet metal equipment manufacturer.
The main business scope:specialized in electronic and electrical appliances,machinery and equipment metal casing design and manufacturing,non-standard chassis,sheet metal processing machinery parts processing,laser cutting,electric power communication cabinets and accessories production.
Company equipment and production capacity:
Germany import and trump 4000W CNC laser cutting machine, working table size: 2000MM*4000MM;carbon steel with a thickness of up to 25mm;stainless steel 15mm;
German joint venture IPG 2500W CNC laser cutting machine, working table size: 1500MM*3000MM;carbon steel with a thickness of up to 16mm;stainless steel 12mm;
Japan imported MOTORUM 2048-LT CNC CNC punch press,working table size:1250MM*3500MM; carbon steel with a thickness of up to 6.0MM;so 3mm;
Germany imported TRUMPF tc2000 CNC CNC punch,working table size:1250MM*3500MM;carbon steel with a thickness of up to 6.0MM; so 3mm;
Germany,Japan imported folding bed a total of 7 units,namely Japan Amada 35 tons 2,50 tons 2,110 tons 2 each,Germany fast 100 tons of bending a.Length up to 4 meters;
Japan Panasonic and American Lincoln protection welding,argon arc welding machine,a total of 12 sets,vertical welding machine 4 sets and planting nail machine,drawing machine,flat wire drawing machine, vibration grinding machine 4 set the number of units;
Taiwan imported 5units,260T,110T,80T,60T 40T each one;
professional cutting,punching,shearing,folding,welding,spraying,material processing;
professional design,drawing and drawing personnel;
professional welding processing personnel,welding personnel after grinding;
spraying production line two (width 2 m * 2 m * 3 meters long).Sheet metal audio Enclosure suppliers
website:http://www.chinataizhun.com/
website2:http://www.china-taizhun.com/

Sheet metal audio Enclosure suppliers
Location, - Wednesday, December 06, 2017 at 07:28:06 (EST)

uv400 protection Sports Sunglasses
Product Description Of uv400 protection Sports Sunglasses:
Product information【POLARIZED LENS】100% UV400 eye protection, effectively blocks 100% harmful UVA & UVB Rays, so your eyes are more comfortable and you can see well.
【LIGHTWEIGHT & DURABLE】 Al-Mg Metal Frame Ultra Light design, weight just 26g, ideal for usage by Motorcycle And Cycling Bicycle, Driving, Running, Fishing,Racing, Skiing and Climbing, Trekking Or Other Outdoor Activities Enthusiasts.
【COMFORTABLE NOSE PADS】Silicone nose pads can adapt to different nose, reduce the burden on the bridge of the nose, enables you a long-time wearing without fatigue.
SizeLens Height: 50MM; Lens Width: 51MM; Temple Length: 142MM; Nose Bridge:21MM; Frame Length 137MM
MOQ10pcs per model per color
ColorAny color is available
FrameFlexible frame
SamplesIt cost 1-3 days to make samples.
CertificateCE & ISO9001:2008 certificate
CustomizedPrint logo on frame and lens; print/weave logo on the strap; custom molded;
Lens colorClear, gray, orange, smoke, chroming silver/rainbow
Price termFOB Beijing; It is EXW price if the quantity less than 1000pcs.
Delivery time25-30 working days after receive the deposit, based on the quantity.
Payment term30% advance payment when order,70% balance before shipment.

T/T, L/C, Western Union

Product Show Of uv400 protection Sports Sunglasses:








Detail Show Of uv400 protection Sports Sunglasses:




Our Services:
Each pair of glasses is high-quality goods,for you with all my heart,to buy.
To provide you with pre-sale,sale,after-sales service,gurantee easy shopping.
Professional customer service team to provide you with services,the entire partient answer for you.
Always keep fashion sensitive touch,to master the tide of new season.cheap Sports Sunglasses
website:http://www.chinaswimwear.net/sunglasses/sports-sunglasses/

cheap Sports Sunglasses
Location, - Wednesday, December 06, 2017 at 07:27:49 (EST)

Super Union will always adhere to the goal of outstanding quality control, customer satisfaction and quick service and the mission of quality first, customer first and quick respose and the mission of quality first.Automatic overturn inspection machine price
website:http://www.chinasuperunion.com/

Automatic overturn inspection machine price
Location, - Wednesday, December 06, 2017 at 07:27:18 (EST)

1.Advantages
For wire mesh cable tray, we promised:
★ Vichnet is the only Manufacturer certificated with UL CE for Wire Mesh Cable Tray in China.
★ 10 Years warranty for Wire Mesh Cable Tray and Optical Fiber Cable Tray.
★ ISO9001, GMC approved management system for Wire Mesh Cable Tray.
★ The appointed supplier of Google, Microsoft, SIEMENS, ADM, COCACOL.
★ The first Wire Mesh Cable Tray manufacturer applied MFDC for welding.
★ Customers spread over 100 countries, even in Japan market.


Advantage for stainless steel wire mesh cable tray
★ We buy material from factory directly to avoid fake stainless. We ask material certificates when we order it.
★ We have salt spray test machine and liquid tester to rest the material.
★ We have a special way for stainless steel producing.
★ We do SGS test for batch order.
★ Wire mesh cable tray is our only one product. It's our company life.
2.Installation
Bends, Risers, T Junctions, Crosses and Reducers can be made from wire mesh cable tray straight sections flexibly in projects.
Trays shall be supported at normally span 1.5m by braket(maximum span is 2.5m).
Wire mesh cable tray systems can be safely used in places where the temperature ranges between -40℃ and +150℃ without any change to their characteristics.
Professional as one of the leading spider bracket for wall mounting manufacturers and suppliers in China, we warmly welcome you to buy discount and low price products in stock with our company - GUOMEI, which can offer you the products customized service.China Accessories suppliers
website:http://www.jsguomei.com/accessories/

wd123E22
http://www.jsguomei.com/accessories/, - Tuesday, December 05, 2017 at 00:19:21 (EST)

924 24 Heads High Speed Embroidery Machine 1000rpm 1200rpm Sequin + Cording
If you're looking for 924 24 heads high speed embroidery machine 1000rpm 1200rpm sequin + cording, welcome to wholesale the machine with our factory. We are known as one of the leading manufacturers and suppliers of various embroidery machines. And the customized orders are also welcome.Sequin & Easy Cording High Speed Embroidery Machine
website:http://www.jsgroupemb.com/sequin-easy-cording-high-speed-embroidery-machine-1

wd123E22
http://www.jsgroupemb.com/sequin-easy-cording-high-speed-embroidery-machine-1, - Tuesday, December 05, 2017 at 00:18:57 (EST)

JIANGSU GUOKAI AUTOPARTS CO.,LTD (formerly known as Danyang HUAXIA Vehicle Accessories Factory) was founded in 2009 year. It is professional manufacturer who researches and develops all aluminum radiator system ( radiator , radiator fan) and air condition system etc in China.
Our products are widely used in all kinds of high-end water-cooled motorcycle (racing), water-cooled tricycles, Microvan, Mini school bus, Auto, ATV, Go-kart and Electric Vehicle etc. in domestic and overseas.
Especially for the current rapid development of the electric vehicle field, our new designed air condition system has achieved numbers of leading technology.
The company covers an area of 15,000 square meters with the plant area 10,000 square meters. And we had passed ISO/TS16949, ISO14000,QS9000 International quality criterion system authentication. The annual yield is 500,000 pieces of radiators and fins, 80,000sets of air condition system. At present we had established long-term relationships with Foton Lovol, Zongshen Group, Longcin Motors, Dayun Auto, Dayang Motorcycle, Liuzhou Wuling Motors, Guilin Daewoo Bus and Hasan Group in China. Meanwhile, we are the designated supplier for Hisun Motors, CFMOTO and Xinyue Moto, which are ranked as China Top3 enterprises in the field. The developed radiators KD250, KD400, KD450, KD550, 700ATV, 700UTV, 800ATV, 800UTV, 1000CC, 1100CC reflect functionally and obtain the good reputation.
GUOKAI adheres to the spirit of “struggle innovation,customer first”, With strong research and development strength, explore more new products to meet customers demand. We sincerely welcome friends from all circles to visit and business negotiations. Your satisfaction is our pursuit!
Radiator Fan products
website:http://www.jsgkqp.com/
website2:http://www.jsdyguokai.com/

wd123E22
http://www.jsgkqp.com/, - Tuesday, December 05, 2017 at 00:18:38 (EST)

Our products advantage:
Fast: Clamping in seconds. The way of clamp traditional manual lock clamp greatly reduce manual work and save time.
Save: Save aligment of processing suitable for variety and special workpiece processing achieve free preset and detection on outside.
Precision: Unique standard interface precision repeat locating.
Our company advantage:
The company has the advanced production facility such as JUNG form
Grinding machine and ELB highprecision surface grinding machine of Germany, MOORE jig grinding
Machine of USA, internal and external grinding machine and thread grindingmachine of Switzerland, and
OKUMA machining center andTSUGAMI numerical controlmachine of Japan.
Stainless Steel Rigging
website:http://www.jschyjss.com/stainless-steel-rigging/

wd123E22
http://www.jschyjss.com/stainless-steel-rigging/, - Tuesday, December 05, 2017 at 00:18:18 (EST)

4J36(Invar 36) Bolt
BDF can produce qualified 4J36(Invar 36) bolt of all kinds of cold formed and hot forged. The forms are hexagon bolts, hex heavy bolts, socket cap bolts, anchor bolts, and other non-standard bolts according to customer drawings. The size ranges from M8-M100 in METRIC and 3/8” to 3-1/2” in INCH, with varies length.
Features:
Invar 36 is a 36% nickel-iron alloy notable for its uniquely low coefficient of thermal expansion which is roughly one-tenth that of carbon steel in the range from room temperature to around 200℃. It also retains good strength and toughness at cryogenic temperatures. It can be hot and cold formed and machined using processes similar to austenitic stainless steels.
Applications:
Invar 36 is useful for applications where high dimensional stability is required such as standards of length, precision optical and laser system, cryogenic components. It is also used in conjunction with high expansion alloys in applications in bimetallic thermostats.
Chemical composition:
%FeNiCMnSiPSCoCr
minbalance35
max370.150.600.400.0250.0250.500.25
Physical properties:
Density8.11 g/cm3
Melting range1430℃Precision Alloy Bolts
website:http://www.jsbdfastener.com/alloy-bolts/precision-alloy-bolts/

wd123E22
http://www.jsbdfastener.com/alloy-bolts/precision-alloy-bolts/, - Tuesday, December 05, 2017 at 00:17:57 (EST)

Jiangsu Bailey Steel Bridge Co.,ltd. is one of the biggest specialized Steel bailey bridge manufacturers with leading manufacturing process for Steel bailey bridges in China, who has been engaging in this line for 20 years with an International Quality System Certification of ISO9001:2008 and as cooperation partner with the research institutions of the People's Liberation Army.
With the capital asserts of 10 million and the monthly capacity of 2,500 tons for the production of different types of single lane bailey bridge, Jiangsu Bailey Bridge Co., Ltd. now has 20 engineers and experts and 430 workers for bailey bridge design, research and production. Up to now, many types of high bending and shear resistance new bailey bridges have been developed to meet different load requirements such as Grade I road, Grade A urban road, America loading standard HS25 and British loading standard HA. All of the components of bailey bridges are strictly made according to the Chinese Standard JT-T 728-2008 "Technical Specifications for the Construction of Highway Bridges and Culverts" and then tested and authenticated by No. 2 Engineer Research Institute of the Chinese People's Liberation Army. Therefore, the bailey bridges made by Jiangsu Bailey Bridge Co., Ltd. are not only owned good market reputation in China but also greatly exported to oversea market like Nigeria, Angola, Congo, Cambodia, Nepal, Venezuela, Vietnam, Bangladesh, Papua new guinea and so on.
We can provide bridge design and construction solutions in heavily congested metropolitan and urban areas as well as rapidly installed modular bridges on minor feeder roads in rural areas. All our solutions are complemented by traffic analysis, ensuring optimization, and thereafter the most cost effective structures requiring minimal maintenance.
In support of design we have highly qualified engineers that are experienced in developing complex, multi stage, traffic solutions and structural engineers that employ the most advanced structural analysis to ensure the specific performance of a structure. Other engineering services include analysis and monitoring of existing bridge structures.
Company with the business philosophy_"Honesty, cooperation, innovation, success together", welcome friends all over the world to work hand in hand with us to create a better tomorrow!
Company Profile
OEM Services Provided: NO
Business Type: Manufacturer
Main Export Markets: Oceania
China Floating Bridge
website:http://www.jsbaileybridge.com/

wd123E22
http://www.jsbaileybridge.com/, - Tuesday, December 05, 2017 at 00:17:35 (EST)

Our History
Jiangsu Aoda Textile Co., Ltd. is located in Jiangyin, Jiangsu province, China. Our company is specializing in the production of a variety of yarns like Chenille Yarn, Mohair Yarn, TT Yarn and Feather Yarn and so on. We can customize and produce varied types of yarns according to customers’ needs. (Our Tian Lihe International Trade Co. Ltd. in Zhangjiagang Bonded Zone has rights to import and export.)
“Excelsior” is our purpose. Integrity, innovation, confidence and professionalism constitutes our Company Spirit. Our employees hold that excellent products and services are our achievements and pride. Excellent geographical environment, advanced production equipment, scientific management method, strong technical force and energetic leadership will make Jiangsu Aoda Textile Co., Ltd. become a future star of the textile industry.
Our Factory
Our Product
Chenille Yarn, Wrapped Yarn, Bigbelly Yarn, Air Yarn, Toothbrush Yarn, Feather Yarn, Loop Yarn, Half Side Napped Yarn, Core Spun Yarn, Napping Yarn, Lantern Yarn, Neps Yarn, Sequin Yarn, Roving Yarn/ Iceland Yarn, Sausage Yarn, Belt Yarn, Elastic Yarn, TT Yarn, Mohair Yarn, Lily Yarn and so on.Product Application
Kintting, hand kintting, garments, knitwear, weaving, cloth, embroidery, bedding set, curtains, carpet, towel and so on.
Production Equipment
Our service
1. Your inquiry will be replied in the earliest time.
2. We provide customized services. For the packing and loading, customized request is also available.
3. Care instruction and knitting suggestion.
4. We have been endeavoring to provide you first class service and product all the time. If you have any problem with our product or service, please do not hesitate to contact us. We will solve it to your satisfaction.Polyester Brush Yarn factory
website:http://www.jsaodayarn.com/

wd123E22
http://www.jsaodayarn.com/, - Tuesday, December 05, 2017 at 00:17:15 (EST)

Metal Bond Glass Pencil Diamond Grinding Wheel
Outer Diameter:25~250mm
Inner Diameter:12,22,25,30mm
For glass thickness:2~10mm
Grit: 80#~320#
This sintered diamond shape wheel is specially for glass.
Application: With round edge,special for glass edge processing grinding,can be used on shape edging machine,CNC machine.
This type of straight edge / round edge diamond grinding wheels can be customized according to client’s needs.
Tip while using Glass Pencil diamond form grinding wheel :
Working in cooling water, high precision, sharp grinding , low noise, no tremor, no broken edge, high wear-resistance,high efficiency, long service life.
How to make order:
1.welcome to send email to info@jrdiamondtools.com or send inquiry in bottom of page.
2.Kindly provide product information to us. If can not provide, pls let us know application so that our staff will recommend proper tool for you.
3.As soon as we agreed on prices and other terms, our staff will send PI for payment. When production finished, parcel will be sent out by DHL.
Company information:China metal bond grinding wheel
website:http://www.jrdiamondtoolsgroup.com/metal-bond-grinding-wheels/diamond-profile-wheel/

wd123E22
http://www.jrdiamondtoolsgroup.com/metal-bond-grinding-wheels/diamond-profile-wheel/, - Tuesday, December 05, 2017 at 00:16:35 (EST)

36V 300W 16A DC Brushless Motor Controller with Hall Sensor for Electric Bicycle
Main Features:
Pedal Assistant (PAS)
Over-current protection
Speed limited
Under-voltage protection
Soft Starter
Specifications:
Rated Voltage: 96V
Overvoltage: 120V
Undervoltage Value: 68V
Rated Current: 10-10.5A
Phase angle: 120°
Working Temperature: -20 to 125℃
The Number of MOSFETs: 6 Pieces
Hall Sensor Sequence: Green Yellow Blue
Motor Phase Sequence: Blue Green Yellow
Packaging &Delivery:
Packaging Details: 1set/inner box 28 sets /carton
Delivery Detail: Shipped in 15 days after payment


JIAQI is specialized in qualtiy and durable 96v 10a dc motor controller manufacturing and selling over the world, which is one of the largest and professional 96v 10a dc motor controller manufacurers and supliers in China since 2001.
FAQ:
1. Q: Can I get samples?
A: Yes, samples are available for you to test and check quality.
2. Q: Do you have products in stock?
A: Mostly No. All products are to be produced according to your order including samples.
3. Q: What’s the delivery time?
A: Normally it takes about 10~30 working days to finish an order.
Exact delivery time should be confirmed by further communication.
5. Q: How does your factory perform quality control?
A: Internal inspection is adopted,Everyone need check the quality for previous procedure and there must be 100% tested for some key parameter of the controller.
Third party inspection is welcomed.
6. Q: Can I put my own LOGO on the products?
A: Yes. You can put your own LOGO on the products and also for the package outside.

7. Q:What's your warranty terms?
A: Different warranty for different products. Contact with us for detailed warranty terms.
8. Q: Will you deliver the right goods as ordered? How can I trust you?
A: Surely, you will receive the goods as confirmed. We are looking for long term business instead of one time business.
Mutual trust and double wins are what we expect.
9. Q: Can I visit your factory?
A: You are welcomed. We are located in Jiaxing City,Zhejiang,China. Electric Bike Controller suppliers
website:http://www.jqcycle.com/electric-bicycle-controller/

wd123E22
http://www.jqcycle.com/electric-bicycle-controller/, - Tuesday, December 05, 2017 at 00:15:53 (EST)

Jiangmen Magsource New Material Co., Ltd, specialized in producing magnet material, passed TUV: ISO TS16949:2009 quality system certificate. Passed the SGS,ROHS, REACH environmental audits, which is one of the professional production base in magnet material industry. Most of our products are exported to Hong Kong, America, Japan, Taiwan, and Europe and so on. Many famous brands are our important customers. The performance and quality of our core products, arc magnets, are in a leading position in domestic.
As a High-Tech factory, we focus on producing and selling sintered NdFeB magnet finished product. The products are widely used in various Micro motors, Household Appliances, Digital Cameras, Mobile phones, Wind Power Generations, Magnetic Resonance Equipment, Toys, Stationery, and Crafts etc.
The annual production capacity is 1,200 tons for sintered NdFeB permanent magnet material, can meet different ends market with various types of NdFeB permanent magnet materials.
Welcome and much appreciated our website. We will keep“Innovation, Management, Quality and Service” as principle. Providing competitive price, fastest delivery time and best supporting customer service. Let’s establish win-win cooperative partnership in the future.
Our Certificate
Production Equipment
Office
Wire-Electrode Cutting
Strip Casting
Smelting
Internal Circle Cutting Workshop
Our service
Before Sale
* Pofessional R&D team Assist for developing stage
* Multi language sales team to meet different countries
* Competitive advantage products
* Payment by Paypal accepted
* Confidentiality agreement "business secret contract"
* Quality Assurance with TUV/ISO:TS16949
* Small order welcomed
Sale
* Lead time following
* Continous Production details update
* Professional & active international sales team
* On time delivery arrangement
* Prompt Packing details updated at once
* Professional Anti-Magnetism Packing
After Sale
* After sales service 24h*7days
* Prossional customer service engineering team support
* Delivery updates followed
* Market Information update promptly Bulk Magnetic Dolls
website:http://www.jpmfmagnets.com/

wd123E22
http://www.jpmfmagnets.com/, - Tuesday, December 05, 2017 at 00:15:14 (EST)

Our main products are used for tractor spare parts,truck spare parts and auto spare parts.Includin MF ,JOHN DEERE, MTZ tractor spare parts,BEDFORD,MITSUBISHI truck spare parts and Japanese , South Korea cars' spare parts and so on.
As a result of high quality and outstanding customer service, we have gained global sales network reaching the South America,Middle east,Africa, Europe and other countries.
If you are interested in any of our products or would like to discuss a custom order,please feel free to contact us.We are looking forward to forming successful business relationship with you around the world in the future.Outside Mirror Price
website:http://www.chinalingstar.com/
website2:http://www.lingstarco.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:40:13 (EST)

FAQ:
Q1: Are you professional in curtain accessory?
A1: Absolutely, we are the lead of curtain accessory supplier. Our major products are curtain finial, curtain rod, curtain bracket. We design and supply the elegant curtain pole products decorating your window and grace you home.
Q2: Will you provide samples to customers?
A2: Yes, of course, sample is free, but the freight collect.
Q3: How can I get the price list?
A3: Just tell us which product do you like or need ? Then we will send the price list to you as you need.
Q4: Can we visit your factory ?
A4: Yes, welcome!China Brackets manufacturers
website:http://www.chinalandjoint.com/brackets/

kjtrtm0
- Sunday, December 03, 2017 at 23:40:00 (EST)

FAQ:
Q1: Are you professional in curtain accessory?
A1: Absolutely, we are the lead of curtain accessory supplier. Our major products are curtain finial, curtain rod, curtain bracket. We design and supply the elegant curtain pole products decorating your window and grace you home.
Q2: Will you provide samples to customers?
A2: Yes, of course, sample is free, but the freight collect.
Q3: How can I get the price list?
A3: Just tell us which product do you like or need ? Then we will send the price list to you as you need.
Q4: Can we visit your factory ?
A4: Yes, welcome!China Brackets manufacturers
website:http://www.chinalandjoint.com/brackets/

kjtrtm0
- Sunday, December 03, 2017 at 23:36:47 (EST)

About Us Based in Xiamen of China, Current Stone have a strong team working together to make sure our clients are happy with our products and customer service.Current Stone is a well established company and specializes in high quality cut stone in both of granite and quartz.For granite, we supply a large selection of granite cobble, paving slab, curb and our rich experience of customized and tailed products could give our clients advantage on any commercial projects or perfect personal house.For quartz, we are single-mindedly devoted to the best quality of countertops for any of our projects no matter in a hotel or a single house.We value our good reputation and quality-oriented is what we focus on all the time. With our experienced engineer, professional craftsmen, strict quality control and efficient management system, we assure all our clients of top quality products, punctual delivery and good after-sale service. We’ll be more than happy to be with you for better business.wholesale Royal White Quartz Countertop
website:http://www.chinaktstone.com/
website2:http://www.chinaktstein.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:36:29 (EST)

Kestar factory regards the scientific and technological innovation as the development cornerstone, makes great efforts to improve R & D and innovation capability, concentrates on new products design, development, quality control, technical support and sales services, has many invention patents and Utility model patents. Kestar factory has implemented ISO9001:2008 Quality Management System and ISO14001:2004 Environmental Management Sytem. Kestar products have the international safety certificates of UL, CE, VDE, CSA, CQC, etc. All products are RoHS and REACH compliant.
Kestar factory’s purposes are research and design, Innovation-driven development, design and manufacture quality products that meet customer specific needs, make the customer fully satisfied.
Please kindly enter Kestar’s official website of www.kestar.com.cn for more details.Surge Arrester
website:http://www.chinakestar.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:36:08 (EST)

Equipped with a productive factory, Jamaica is one of the leading manufacturers and suppliers of competitive price paper chemicals. We now brings you retention aid, high quality paper making chemical additive.Paper chemicals manufacturers
website:http://www.chinajmchem.com/paper-making-chemical/

kjtrtm0
- Sunday, December 03, 2017 at 23:35:48 (EST)

Main Markets
Part partners
Corporate Snapshot
Found: Oct 2005
Capital:US$40million/RMB$0.134billion (2013)
Headquarter:China mainland
Employees:210(2014)
QC Flow Chart
Product Line
Organizationhigh voltage capacitors
website:http://www.china-jinpei.com/
website2:http://www.jinpei-capacitor.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:35:35 (EST)

Jhen Ten carries on traditional Japanese production skills and latest Japanese industrial technology to produce filtration products and all kinds process machinery .
In addition to the introduction of new manufacturing methods and the purchase of advanced welding equipment, we are also dedicated to researching the improvement of quality, function and usage life of our products. We have been meeting global demand of high quality &technical support to our clients.Our products cover from all kinds sanitary filter,cartridge filter, bag filter ,mixing tank ,storage tank etc,which have been applied into fields of pharmacy, food & beverage, biological engineering, lab solution laboratories, mineral water, liquor and cosmetics.
No matter the functions, data presentation, material use, welding techniques, QC, or the look of our products have gone through careful design and are strictly comply with ISO9001 and CE standard system.Besides We have obtained the sanitary license and honour of high quality&honesty from authority.China Stainless Barrel suppliers
website:http://www.chinajhenten.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:34:55 (EST)

We accept OEM and help customers make good design in packing and free spare parts for after selling service.Also we will visit market and make good scheme for customers.low price WQ D dirty WATER PUMP
website:http://www.chinajenjet.com/
website2:http://www.chinajenjetru.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:34:38 (EST)

We believe that the Pay As You Go solar power system is proved to be the new trend in Africa and around the world!solar power box technology
website:http://www.chinainyan.com/
website2:http://www.inyantech.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:34:14 (EST)

CUSTOMER SERVICE
1.Guarantee Time: 24 months
2.Professional production of juice dispenser since 2000
3.Direct manufactures
4.Extra spare parts are attached with order for stock accessories
5.Specialized after-sales teams offer technology support
6.The punctual delivery of goods, quality and quantity guaranteed
FAQ
Q: Can we put our own logo on the machine?
A:Yes, we can do OEM for you.
High quality commercial Juice Dispenser suppliers
website:http://www.china-icecream-machines.com/

kjtrtm0
- Sunday, December 03, 2017 at 23:33:02 (EST)

Shenzhen Sunsoar Circuit Technology is specialized in Printed Circuit Board & PCB Assembly including components sourcing, functional test and complete assembly for clients all over the world.
All of our base materials and process can meet ROHS and UL international certifications. We stand behind our reputation and have a 100% quality and customer's service promise.If there is any defects for our products, our team will go back to produce a new batch of products that is in conformity with every specification you have requested for.
Our PCB capabilities range from 1-18 layers prototypes and full production pcb manufacturing , with special features such as blind & buried vias, controlled impedance,heavy copper, via fill and more,Also we can deliver Single-Side PCB and Double-side PCB Prototype within 24 hours, 4-8 layer PCB Prototypes in 3-5 working days.The quick and fast lead time stably ensures our customer of quick research speed to occupying the market.
We rely heavily on customer and manufacturing feedback to produce a world-class production,our staff enjoys supporting customers to find a solution to reduce cost of products without sacrifice quality.Sunsoar will be your right choice.
http://www.oem-pcb.com/

wle358
sdfds, - Monday, November 27, 2017 at 00:38:03 (EST)

great job
Dolan Bright
alabama, - Friday, November 03, 2017 at 16:23:25 (EDT)

Thanks, I hope to build or buy a Mustang 2 soon.

Alan

Alan Anderson
Heber Cty, UTAH, - Friday, January 27, 2017 at 10:29:01 (EST)

Hi!
Mark Doble
Holly Springs,NC, - Monday, April 11, 2016 at 00:03:51 (EDT)

Thank you for sharing your Mustang2 journey, it was very helpful and informative. I'm considering building, so good to read and see what others are doing. Thank, and happy flying. G
Greg Davis
Charlottetown, PEI Canada, - Saturday, August 17, 2013 at 14:58:23 (EDT)

If you need to get in touch with me 'mark@aviatorbrew.com'

i now run a brewery in North Carolina www.AviatorBrew.com

Mark Doble
Holly Springs, NC, - Saturday, July 27, 2013 at 10:47:47 (EDT)

I would love to see your creation in person
Carl
Colfax NC, - Saturday, April 27, 2013 at 15:31:30 (EDT)

Great Site!
Kristal L. Rosebrook Ryan

Kristal L. Rosebrook Ryan
Florida, - Sunday, March 11, 2012 at 22:24:55 (EDT)

Hello,

We just finished a new website for homebuilt aircraft. www.homebuiltdirectory.com We are trying to grow it to be the world's largest single collection of homebuilt aircraft/project listings. Please visit and list your aircraft for the world to see. A huge benefit of our site is the ability for site browsers to search our site for specific aircraft...(for example... all homebuilts with Corvair engines.)

The website just became live a few days ago. We would greatly appreciate any word of mouth advertising you can pass on to other homebuilders. Thank you very much for your time.

Sincerely,
Jim Tomaszewski
EAA# 590427

Jim
NY, - Tuesday, November 08, 2011 at 12:36:02 (EST)

I have a complete center section, plan set, assy manual, main spars, all the ribs and the flap kits i am trying to get this thing out of my garage any offer will be acepted within reason please email me at buttram12@hotmail.com or call 775-303-7344
ryan smith
yerington nevada, - Wednesday, June 29, 2011 at 14:03:36 (EDT)

Great looking bird! Pretty much decided I'm going to go with the Mustang 2. Looks like a blast to make/fly. Hopefully I can get started on mine soon.
Brandon
Tuscaloosa, AL, - Thursday, June 23, 2011 at 17:31:42 (EDT)

just looking through some sites tryin to make up my mind on
a mustang 2 or an rv7

seth haag
pa, - Monday, April 11, 2011 at 09:30:11 (EDT)

Great site,very helpfull. Just wanted to see how you fitted your canopy.
I`m building a CA-65B skyfly.

Ray Johnson
Leongatha Australia, - Monday, March 08, 2010 at 06:38:08 (EST)

Great looking bird! Your website is an asset for all M-II builders. I'm early in the building of S/N M-II-2434.
Jim Savage
Pataskala, OH, - Monday, November 02, 2009 at 21:20:47 (EST)

Great Pictures that I find invaluable for helping me build, thanks
Chuck Plumery
Brooksville, FL, - Wednesday, July 08, 2009 at 16:53:34 (EDT)

hot looking bird even without paint. Just got my plans gonna order center sec. soon

John Maldonado
New york, - Sunday, March 08, 2009 at 04:17:58 (EDT)

Mark,
I was the guy with the Cessna 182 on the row behind you that visited you numerous times while you were at the hangar late at night. We moved also from the great state of Florida. Airplane looks great and I'm glad it flys well. Good luck and get your IFR ticket to lower the insurance.

Roger Moore
Normal, IL, - Saturday, February 28, 2009 at 09:59:53 (EST)

Looks Great! It also looks like you homebrew from some of the pictures.
Kevin
USA, - Tuesday, February 17, 2009 at 16:03:53 (EST)

WOW!!!! Really impressive! I'm starting on the forward fuselage and really liked how your M2 turned out.
Stephan Polman
Gilberts, Illinois, - Friday, October 10, 2008 at 14:58:00 (EDT)

Great Web site...i'm starting a mustang ii kit soon.
Rick Unilever
Detroit, MI, - Monday, April 21, 2008 at 08:21:51 (EDT)

Very useful info for me. I just ordered a QB kit of MII. Thanks! As soon as I'll receive the kit I will be often guest at your site.
Andrew Ferchuk
Ukraine, - Friday, December 14, 2007 at 11:20:55 (EST)

Tester
Mark
Here, - Tuesday, December 11, 2007 at 16:16:46 (EST)

The guest book is up and running (again!)
Mark Doble
Holly Springs, NC USA, - Thursday, December 06, 2007 at 11:13:52 (EST)